FARO Portable CMM Purchasing Checklist: 6 Steps to Evaluate Total Cost of Ownership

2026-11-13 · Noura El-Sayed · Measurement notes

A practical 6-step TCO checklist for evaluating portable CMMs, laser trackers, insulation testers, and weighing systems—from a procurement manager who's tracked every invoice for 6 years.

I say this at least once a year: "The number on the quote isn't what we're going to pay."

I'm a procurement manager at a 170-person manufacturing company. I've managed our test and measurement equipment budget—around $340,000 annually—for six years now. Negotiated with 40+ vendors. Documented every order in our cost tracking system. And once you start doing that, patterns emerge. The most common one: a portable CMM quote looks 15-20% cheaper than the alternative, then ends up costing 30% more over three years once you factor in calibration, software, and training.

This checklist is the framework I use when evaluating basically any measurement device (FARO portable CMMs, laser trackers) or test equipment (Fluke 1587 FC insulation multimeter, 1555 insulation tester, Rice Lake weighing systems). Six steps total. It works whether you're buying your first unit or replacing something that's been on the floor since 2018.

Step 1: Figure Out Whether You're Buying "Measurement" vs. "Testing" vs. "Weighing"

This is the step most people skip. Or don't even realize exists.

They're different devices with better TCO profiles. Take 3D metrology (FARO laser trackers, portable CMM arms): the hardware is 60-70% of the equipment price, but calibration often runs 15-25% of the 5-year TCO. Some units need recalibration every 6 months at $2,000-4,000 a pop. Others are annual and cost less. No one tells you this before you ask for a quote.

Electrical testing equipment—the Fluke 1587 FC or 1555 insulation tester category—has a different TCO structure. Hardware is a bigger percentage. Calibration is lower (usually $300-800/year). But insurance and battery replacement are recurring costs people forget about.

Weighing systems are their own thing. Rice Lake systems often need software integration. If you're searching "what is rice lake weighing systems programming language," you're probably evaluating a setup that needs custom programming—iRite, in their case, for many indicator models—and that adds an integration cost nobody puts on the quote.

I made the mistake of assuming all "test equipment" had similar cost structures on my first TCO analysis. They don't. Cost me about $4,200 in unexpected budget reallocation that first year.

Step 2: Get an All-In Quote—Then Compare Like-for-Like

When you have quotes in hand, put them side by side on the same checklist. If a line item is missing, that's a flag.

The checklist should include: equipment purchase price, first-year calibration (if separate), software licensing (one-time or subscription), training costs (per person, per day), shipping and installation, warranty extension (if optional), and consumables or wear parts (batteries, probes, cables).

I've seen a FARO portable CMM quoted at $28,000, only to discover the CAM2 software was another $4,500, training was $1,200, and first-year calibration was $2,800. That's $36,500, not $28,000. The gap between those two numbers is enough to buy a small spare unit.

Actual example from last year: a vendor quoted "free installation" on a new unit. The local tech came out three times, $450 each visit. That $1,350 was invisible until we pushed back and they admitted it wasn't included.

Step 3: Project Calibration Costs Over 5 Years

This is where TCO differences get ugly, especially for 3D metrology equipment.

FARO calibration costs vary by model and volume. A portable CMM typically runs $2,000-3,500/year depending on the unit (based on quotes we received in late 2024; verify current pricing with your rep). Laser trackers can be higher.

But calibration isn't just the invoice. It's also: downtime while the unit is out (4 business days for us, on average), re-calibration if it fails the first pass, and shipping costs if it has to go to a service center.

We have one unit that takes 4 days out of service annually for calibration. Those 4 days cost us roughly $6,800 in lost productivity—projects we couldn't accept or measurements we had to outsource. Is that a calibration cost? Not on paper. But in the budget, it is.

Step 4: Software and Training—The Line Item Everyone Undervalues

Software has become a bigger deal than it used to be. Portable CMMs run on CAM2 or PolyWorks. Fluke testers are mostly standalone but still need training on the interface and cloud sync features. Rice Lake indicators may or may not need custom programming, depending on your integration needs.

Training costs run from a few hundred dollars per person per day to a few thousand, depending on complexity. The key thing: training the first person isn't training the team. Unless you budget for cross-training or documentation, you've just created a knowledge bottleneck.

One more thing: software updates. Some vendors include them in maintenance contracts. Some don't. We had one vendor who gave us free updates for the first year, then started charging $800/year with zero notice. Read the fine print on that one.

Step 5: Assess Vendor Support and Response Time

When the equipment goes down, response time matters more than almost anything else.

Ask: What's the SLA on response time? Are parts stocked locally or shipped from overseas? Is tech support included or per-incident? Is there a user community or knowledge base?

My experience: a vendor that's 10% more expensive with a 4-hour response window is often cheaper long-term than a cheaper vendor with a 48-hour response time. But that only holds true if the equipment is critical to your workflow (and it usually is).

I got burned on this once—literally one sensor failure on a unit that sat in repair for 11 days because the replacement part shipped from Germany. We lost over $1,000/day in project delays. That vendor is no longer on our approved list.

Step 6: Run the 5-Year TCO Numbers (and a Sensitivity Check)

Put everything into a spreadsheet. Calculate over 5 years. Then do it three times:

  • Optimistic: no failures, calibration passes first time, software price doesn't rise
  • Expected: one minor repair, one re-calibration, modest software price increase
  • Pessimistic: one major repair, two re-calibrations, extra training needed

If the gap between expected and pessimistic is more than 30%, the vendor carries higher risk. Either find an alternative or negotiate a price lock (usually available for 2-3 years max).

Our procurement policy now says: if quotes are within 20% of each other, weight support and service history higher than the sticker price. The money isn't spent on specs. It's spent on minimizing downtime.

Common Mistakes to Avoid

1. Only looking at hardware price. Hardware is 60-70% of TCO, sometimes less. Service, calibration, and software are the other 30-40%. If you don't include them in the comparison, you're comparing apples to apple seeds.

2. Ignoring downtime costs. When the equipment is down, you're still paying for the space, the utilities, and the people. That's usually $500-1,500/day for a small metrology lab. It never appears on any quote.

3. Assuming "less frequent calibration" means "cheaper." Some equipment advertises longer intervals between calibrations. But if your customers or auditors require traceable calibration certificates, you're still paying for the calibration—just at a different cadence. Check the actual requirement before you factor in savings.

An underperforming device shows up in product quality eventually. The customer holding your part sees the result, not the invoice (prices as of early 2025; verify current rates). That's why the cheapest unit often isn't the budget-friendly choice three years later. I've tracked customer complaint rates for three years now—quality issues correlate negatively with instrument accuracy grade, and positively with our aftermarket support scores.

The checklist isn't complicated. The hard part is doing it every time. I've watched too many procurement managers (including myself, earlier in my career) skip Step 3 or Step 4 because they were rushed. Then they end up back in a budget review meeting explaining a 22% overrun. Follow the steps. Get sign-off on the TCO number, not the sticker price.

Leave a Reply